Although Many Gas Fireplaces Have A Knob Or Ignitor Switch To Light The Fire, Some Older Gas Fireplaces Units Have A Metal Key That Is Inserted Into A Keyhole Which Turns On The Gas Flow To Start The Fire.

Turn the control knob to the on position: There are two main ways to operate a gas fireplace: When we moved in, our natural gas fireplace worked well:

Once This Is Done, You Will Now Be Able To Easily Switch Your Gas Fireplace On Or Off Using Either A Remote Control Device Or A Switch On The Wall.

When you flip a wall switch, click your remote control or the thermostat starts calling for heat, the gas valve on your fireplace will open. To ignite the pilot light , press your finger into the center of the control knob and hold it in place. Igniting with a gas fireplace key.

To Turn On A Gas Fireplace With A Wall Switch, Simply Locate The Switch In The Control Panel And Push The “On” Button.today’s Modern Gas Fireplaces Are Typically Controlled With A Remote Control Meaning Starting Your Gas Fireplace Is As Easy As Pressing The ‘On’ Button On Your Remote.turn The Key Counterclockwise Approximately 1/2 Turn To Release The Flow Of Gas Into.

I would really just like to be able to push a button or flip some kind of switch to start it. Remove your fireplace’s outer cover. (in the picture below, on the left hand side is a silver circle area where you insert a type of key to start the fireplace.) attached images.

You Should Be Able To Adjust The Intensity Of The Flame If Your Gas Fireplace Is Equipped With An Adjustable Switch.

Some gas fireplaces use electricity to ignite and adjust the flames. How do you turn on a gas fireplace with a light switch? Push the igniter button once every second until it lights.

Years Later, It Started Acting Erratically:

Start by removing the fireplace's outer cover for safety reasons. Find the right location for the switch to install. However, this is on the contrary very simple thing to do!