I Have A Whirlpool Duet Dryer Gew9200Lw1 That Wont Start.

The thermal fuse is a safety device designed to stop the dryer from catching fire. This video will show you what you need to check if you press the start button on your kenmore or whirlpool dryer and it does not start up. Push the button in on the door switch with one meter probe on com and the other meter probe on no and see if it reads.

First Make Sure The Door Is Shut.

As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry. You'll probably see a burn mark near the relays. Make sure your dryer is unplugged!

When Your Clothes Are Wet, And You’re In A Hurry, Having Your Dryer Work Properly, Is An Important Part Of Your Routine.

It may be because of power issues, a faulty motor, problems with the start button, a blown thermal fuse, or a defective door switch. It may be because of power issues, a faulty motor, problems with the start button, a blown thermal fuse, or a defective door switch. If your dryer just clicks and will not start, a blown thermal fuse is often the problem.

Several Factors May Cause Your Whirlpool Duet Dryer Not To Start.

You should be able to hear a soft humming as the dryer attempts to start its components. To access the start relay in the console, remove the screws on the back of the end caps of the console and you can then lift it off of the top panel (with the dryer still. The thermal fuse is tripped if the temperature in the dryer becomes too hot.

When A Whirlpool Dryer Won’t Start But Has Power, The Cause Is Usually The Thermal Fuse, The Start Switch, The Door Switch, Or The Belt Switch.

Whirlpool duet dryer won t start just clicks. Unplug the dryer and look in the bottom front left corner. This is an important error code that means the whirlpool washer will not turn on.